KBIKE Lightweight Flywheel Kg 1,4

The flywheel accumulates kinetic energy during the active phase and then delivers it in the subsequent phases.
With the energy accumulated by the flywheel, it is possible to overcome dead spots in the work cycle and compensate for any fluctuations in speed.
The flywheel mass, however, has the disadvantage of opposing the variations in speed, that is the reducing of the accelerations of the engine.
The advantage of installing a lightweight Kbike flywheel is that, given the lower inertia applied to the shaft, the engine can take turns faster and therefore improves acceleration, obtaining a more progressive management of the engine.
You will get a better acceleration at low revs, moreover the engine brake will decrease, which leads to a different control of this.
In this particular flywheel, unlike others, the housing of the free wheel is machined, hardened and grinded before the burnishing treatment.
The weight reduction with our flywheel is about 1.5 kg compared to the original.
The flywheel is supplied with the small parts necessary for assembly but the free wheel (OEM code 70140471A) from the original flywheel must be reused.
This flywheel is interchangeable with OEM code 276Z0061A
Attention, the installation of a lightweight flywheel affects the performance of the motorcycle so it must be followed by qualified mechanics who can also advise you according to your needs.
Material: hardened steel

Ducati OEM Codes: 276Z0061A

Fitment: Monster 797: All years, 2017, 2018, 2019, 2020, 2021; Scrambler 800: 2015, 2016, 2018, 2017, 2019, 2020, 2021, 2022, 2023, 2024, 2025; Scrambler Sixty2 400: 2016, 2017, 2018, 2019, 2020

All KBIKE products are designed for racing use only.

Official KBIKE product page